Read these instructions completely andcarefully.• IMPORTANT – Save theseinstructions for local inspector’s use.• IMPORTANT – Observe allgoverning codes and ordinances.• Note to Installer – Be sure to leave theseinstructions with the Consumer.• Note to Consumer – Keep theseinstructions for future reference.• Unless very knowledgeable in theinstallation of this product, engage aprofessional installer.• Proper installation is the responsibility ofthe installer.• Product failure due to improper installationis not covered under the Warranty.Installation RadiantInstructions Downdraft CooktopIf you have questions, call 800.GE.CARES (800.432.2737) or visit our Website at: GEAppliances.comBEFORE YOU BEGIN13WARNING – Before beginning theinstallation, switch power off at the servicepanel and lock the service disconnectingmeans to prevent power from beingswitched on accidentally. When the servicedisconnecting means cannot be locked,securely fasten a prominent warningdevice, such as a tag, to the service panel.WARNING – TO REDUCE THE RISKOF FIRE, USE ONLY METAL DUCTWORK.IMPORTANT SAFETYINSTRUCTIONSWARNING – TO REDUCE THE RISKOF FIRE, ELECTRIC SHOCK OR INJURY TOPERSONS, OBSERVE THE FOLLOWING:Installation work and electrical wiringmust be done by qualified person(s) inaccordance with all applicable codesand standards, including fire-ratedconstruction.Sufficient air is needed for propercombustion and exhausting of gasesthrough the flue (chimney) of fuelburning equipment to prevent backdrafting. Follow the heating equipmentmanufacturer’s guidelines and safetystandards such as those published bythe National Fire Protection Association(NFPA), and the American Society forHeating, Refrigeration and AirConditioning Engineers (ASHRAE),and the local code authorities.When cutting or drilling into wall orceiling, do not damage electrical wiringand other hidden utilities.Ducted fans must always be vented tothe outdoors.• This unit must be properly grounded.DCBA