GE JP989 Owner's Manual & Installation Instructions

Also see for JP989 Series: Owner's Manual & Installation Instructions Owner's Manual & Installation Instructions Technical service guide Owner's Manual & Installation Instructions

INSTALL 3/4″ FLEXIBLE CONDUIT (cont.)BEFORE MAKING ELECTRICALCONNECTIONSNote to Electrician: The power leads suppliedwith this appliance are UL-recognized forconnection to large gauge household wiring.The insulation of these leads is ratedat temperatures much higher than thetemperature rating of household wiring.The current carrying capacity of a conductor isgoverned by the wire gauge and also thetemperature rating of the insulation around thewire.Aluminum Wiring – WARNING: IMPROPERCONNECTION OF ALUMINUM HOUSE WIRINGTO THE COPPER LEADS CAN RESULT INSERIOUS PROBLEMS.Attach copper wires to aluminum wiring usingspecial connectors designed andUL-listed for joining copper to aluminum. Followthe connector manufacturer’s recommendedprocedure closely.Service Loop – Leave a loop in the wires to thecooktop so that the cooktop can be lifted 12inches without having to disconnect the wiring.Power SupplyLeads Anti-ShortBushing ConduitELECTRICAL CONNECTIONS17 18ELECTRICAL REQUIREMENTS*Model # Voltage Frequency KWJP989 120/240V 60Hz 8.8KW120/208V 60Hz 6.7KW*For reference only. Verify with product ratingplate.Feed the powersupply leadsthrough theconduit; be sure toleave enoughlength to properlyconnect theseleads to thecooktop powerleads.Thread the leadsthrough an anti-short bushing andfirmly seat thebushing in the endof the conduit.Feed the leadsthrough the holein the wirecompartment.As local codespermit purchase alisted conduitconnector suitablefor the sizeconduit. Insert theconduit throughthe connector andattach it to thecover. Allowenough slack toeasily attach thewires to thecooktop.Note: Do notinstall the cooktopwithout a listedconduit connector.The conduitconnector shouldbe installed beforereinstalling thewiring cover.When complete,reinstall the wirecompartmentcover.25Bushing (Fully Seated)INSTALL 3/4″ FLEXIBLE CONDUIT18Remove the screws holdingthe wire compartment coverand remove the cover.ConduitConnectorConduit CoverInstallation Instructions