Safety Instructions Operating InstructionsSafety Instructions Operating Instructions Care and Cleaning Troubleshooting Tips Consumer SupportCleaning the glass cooktop. ge.comAllow the cooktop to cool.Use a single-edge razor bladescraper at approximately a 45°angle against the glass surfaceand scrape the soil. It will benecessary to apply pressure tothe razor scraper in order toremove the residue.After scraping with the razorscraper, spread a few drops ofCERAMA BRYTE® CeramicCooktop Cleaner* on the entireburned residue area. Use aCERAMA BRYTE® Cleaning Pad*to remove any remaining residue.For additional protection,after all residue has beenremoved, polish the entiresurface with CERAMA BRYTE®Ceramic Cooktop Cleaner*and a paper towel.Burned-On ResidueWARNING: DAMAGE to your glass surfacemay occur if you use scrub pads other than thepad included with your cooktop.Allow the cooktop to cool.Spread a few drops of CERAMABRYTE® Ceramic CooktopCleaner* on the entire burnedresidue area.Using a CERAMA BRYTE®Cleaning Pad for CeramicCooktops*, rub the residue area,applying pressure as needed.If any residue remains, repeat thesteps listed above as needed.For additional protection, after allresidue has been removed, polishthe entire surface with CERAMABRYTE® Ceramic CooktopCleaner* and a paper towel.The CERAMA BRYTE ® CeramicCooktop Scraper* and allrecommended supplies areavailable through our Parts Center.See instructions under “To OrderParts” section on next page.NOTE: Do not use a dull ornicked blade.Heavy, Burned-On ResidueUse a CERAMA BRYTE ® CleaningPad for Ceramic Cooktops*.Normal Daily Use CleaningONLY use CERAMA BRYTE® CeramicCooktop Cleaner* on the glass cooktop.Other creams may not be as effective.To maintain and protect the surface ofyour glass cooktop, follow these steps:Before using the cooktop for thefirst time, clean it with CERAMABRYTE® Ceramic CooktopCleaner*. This helps protect thetop and makes cleanup easier.Daily use of CERAMA BRYTE®Ceramic Cooktop Cleaner* willhelp keep the cooktop looking new.Shake the cleaning cream well.Apply a few drops of CERAMABRYTE® Ceramic CooktopCleaner* directly to the cooktop.Use a paper towel or CERAMABRYTE® Cleaning Pad for CeramicCooktops* to clean the entirecooktop surface.Use a dry cloth or paper towelto remove all cleaning residue.No need to rinse.NOTE: It is very important that you DO NOTheat the cooktop until it has been cleanedthoroughly.Clean your cooktop aftereach spill. Use CERAMABRYTE ® Ceramic CooktopCleaner.*25Begin by locking the cooktop; see theControl Lockout section.Control Lockout