GE JSS28 Owner's Manual

Also see for JSS28: Owner's manual Owner's manual Installation instructions Installation instructions Installation instructions

GE JSS28 Owner's Manual Manual pdf 13 page image

13Safety Instructions Operating InstructionsSafety Instructions Operating Instructions Care and Cleaning Troubleshooting Tips Consumer SupportCare and cleaning of the range. ge.comBe sure all controls are off and all surfaces are cool before cleaning any part of the range.If your range is removed for cleaning, servicing or any reason, be sure the anti-tipdevice is re-engaged properly when the range is replaced. Failure to take thisprecaution could result in tipping of the range and cause injury.How to Remove Protective Shipping Film and Packaging TapeCarefully grasp a corner of the protectiveshipping film with your fingers and slowlypeel it from the appliance surface. Donot use any sharp items to remove thefilm. Remove all of the film before usingthe appliance for the first time.To assure no damage is done to thefinish of the product, the safest way toremove the adhesive from packaging tapeon new appliances is an application of ahousehold liquid dishwashing detergent.Apply with a soft cloth and allow to soak.NOTE: The adhesive must be removed from allparts. It cannot be removed if it is baked on.Oven Heating ElementsDo not clean the bake element or the broilelement. Any soil will burn off when theelements are heated.To clean the oven floor, gently liftthe bake element. Clean with warmsoapy water.Control KnobsThe control knobs may be removed for easiercleaning.Make sure the knobs are in the OFFpositions and pull them straight off thestems for cleaning.The knobs can be cleaned in adishwasher or they may also be washedwith soap and water. Make sure the insidesof the knobs are dry before replacing.Replace the knobs in the OFF positionto ensure proper placement.Spring clipClear groovein stemMolded ribGroove StemControl PanelIt’s a good idea to wipe the control panelafter each use of the oven. Use a dampcloth to clean or rinse. For cleaning, usemild soap and water or a 50/50 solutionof vinegar and water. For rinsing, useclean water. Polish dry with a soft cloth.Do not use abrasive cleansers, strongliquid cleaners, plastic scouring pads oroven cleaners on the control panel—they will damage the finish.