GE JVM1540MP2SA Installation Instructions Manual

Contents

GE JVM1540MP2SA Installation Instructions Manual Manual pdf 19 page image

Installation InstructionsRECIRCULATING (Non-Vented Ductless)INSTALLATION OVERVIEWC1. Attach Mounting Plate to WallC2. Prepare Top GabinetC3. Adapt BlowerC4. Mount the Microwave OvenC5. Install Gharcoal Filter|I_ A]-FACHTHE MOUNTINGPLATE TO THE WALL#f\I , I!===oAttach the plate to the wall using toggle bolts.At least one wood screw must be used to attachthe plate to a wall stud._ Remove the toggle wings fiom the bolts._ Insert tim bolts into the mounting plate throughthe boles designated to go into drDvall andreatmch the toggle wings to :_A"onto each bolt.To use toggle bolts:Spacingfor TogglesMoreThanWall-,-l-.-_i_ThcknessToggleWingsMountingPlate_i_Bolt End_ Place the mounting plate against the wall andinsert the toggle wings into the holes in the wallto inount the plate.NOTE: Before tightening toggle bolts and woodscrew, make sure the robs on the mounting platetouch the bottom of the cabinet when pushed flushagainst the wall and that the plate is properlycentered under the cabinet.A• kCAUTION: Becarefulto avoidpinching fingers between the back of the mountingplate and the wall._ Tighten all bolts. Pull the plate away flom the wallto help tighten the bolts.19USE TOP CABINET TEMPLATEFOR PREPARATION OF TOPCABINETYou need to drill holes for the top support screws anda hole large enough for the power cord to fit through.• Read the instructions on the TOP (;ABINETTEMPI_ATE.• Tape it underneath the top cabinet.• Drill the holes, following the instructions on theTOP GABINET TEMPLATE.• CAUTION: Wearsafety goggleswhen drilling holes in the cabinet bottom.