GE JVM1540MP2SA Installation Instructions Manual

Contents

GE JVM1540MP2SA Installation Instructions Manual Manual pdf 8 page image

Installation InstructionsPLACEMENT OF THE MOUNTING PLATEA-_ EMOVING THE MICROWAVEOVEN FROM THE CARTON/REMOVING THE MOUNTINGPLATE_i_ Remove the installation instructions, filters, glasstray and the small hardware bag. Do not removethe SDrofoam protecting the flont of the oven.[] Fold back all 4 carton flaps fldly against cartonsides. Then careflflly roll the oven and carton overonto the top side. The oven should be resting inthe St);rofoam.[]Pull the carton up and off the oven.[] Remove and properly discard plastic bags.MountingPlate[]Remove the 2 screws flom the mounting plate.This plate will be used as the rear wall templateand for mounting. You may discard these screws._] FINDING THE WALL STUDS' ill WallStuds[]Find the studs, using one of the followingmethods:A. Stud finder - a magnetic device whichlocates nails.ORB. Use a hammer to mp lightly across themounting surface to find a solid sound.This will indicate a stud location.After locating the stud(s), find the center byprobing the wall with a small nail to find the edgesof the stud. Then place a mark halfivay betweenthe edges. The center of any adjacent studs shouldbe 16" or 24" flom this mark.]Draw a line down the center of the studs.THE MICROWAVE MUST BE CONNECTED TOAT LEAST ONE WALL STUD.8