5-18 L30 Line Current Differential System GE Multilin5.2 PRODUCT SETUP 5 SETTINGS5General Security SettingsConfirm RADIUSAuthentication(Shared) SecretConfirmation of the shared secret. Theentry displays as asterisks.See thefollowingpasswordsection forrequirements245 characters N/A - AdministratorSETTING NAME DESCRIPTION MIN MAX DEFAULT UNITS MINIMUMPERMISSIONSession Lockout Number of failed authentications before thedevice blocks subsequent authenticationattempts for the lockout period0 (lockoutdisabled)99 3 - AdministratorSession LockoutPeriodThe period in minutes that a user is preventedfrom logging in after being locked out0 (no period) 9999 3 min AdministratorSyslog Server IPAddressThe IP address of the target Syslog server towhich all security events are transmitted0.0.0.0 223.255.255.2540.0.0.0 - AdministratorSyslog Server PortNumberThe UDP port number of the target syslog serverto which all security events are transmitted1 65535 514 - AdministratorDeviceAuthenticationWhen enabled, local device authentication withroles is allowed. When disabled, the UR onlyauthenticates to the AAA server (RADIUS).NOTE: Administrator and Supervisor (if stillenabled) remain active even after deviceauthentication is disabled. The only permissionfor local Administrator is to re-enable deviceauthentication when device authentication isdisabled. To re-enable device authentication, theSupervisor unlocks the device for settingchanges, and then the Administrator can re-enable device authentication.Disabled Enabled Enabled - AdministratorFirmware Locked Indicates if the device receives firmwareupgrades. If Yes and the firmware upgradeattempt is made, the device denies the upgradeand displays an error message that the lock isset. On each firmware upgrade, this setting goesback to the default.No Yes Yes - AdministratorFactory ServiceModeWhen enabled (checkbox selected), the devicecan go into factory service mode. To enable,Supervisor authentication is necessary.Disabled Enabled Disabled - Supervisor(Administratorwhen Supervisoris disabled)Restore to Defaults Sets the device to factory defaults No Yes No - AdministratorSupervisor role When enabled (checkbox selected), theSupervisor role is active. To enable,Administrator authentication is necessary. Whendisabled, the Supervisor role is inactive. Todisable, Supervisor authentication is necessary.Disabled Enabled Enabled - Administrator toenable andSupervisor todisableRADIUS usernamesEnsure that RADIUS user names are not thesame as local/device role namesSee RADIUSserverdocumentsSeeRADIUSserverdocuments- AdministratorPassword Local/device roles except for Observer arepassword-protected. All RADIUS users arepassword-protected.See thefollowingpasswordsection forrequirementsSee thefollowingpasswordsection forrequirementsChangeMe1#Text The specified roleand Administrator,except forSupervisor, whereit is only itself
