8Consumer Support Troubleshooting Tips Care and Cleaning Operating Instructions Safety InstructionsHow to SetPush the knob in and turn in eitherdirection to the setting you want.At both OFF and HI the controlclicks into position. You may hearslight clicking sounds during cooking,indicating the control is keeping thepower level you set.A HOT SURFACE indicator light, on thecooktop, will glow when any radiantelement is turned on. It will remainon until the surface is cooled toapproximately 150°F.Hot surface indicator light will: come on when the unit is hot to the touch. stay on even after the unit is turned off. glow until the unit is cooled to approximately150°F.Be sure you turn the control knob toOFF when you finish cooking.Using the Bridge Burner (on some models)To use the bridge burner, turn theleft front control knob to the BRIDGEBURNER settings.For full bridge surface unit operation,also turn on the left rear surface unit.To use only the front surface unit, turnthe control knob to the FRONT BURNERsettings.Using the surface units.Tri-Ring Surface Element (on some models)The front right surface element offers 3 cookingareas to match the size of the cookware youare using.To use the largest cooking area, push inand turn the SELECTOR knob to 12″. Pushand turn the control knob to the desiredsetting.To use the medium cooking area, pressand turn the SELECTOR knob to 9″. Pushdown and turn the control knob to thedesired setting.To use the smallest cooking area, turnthe SELECTOR knob to 6″. Push and turnthe control knob to the desired setting.This will activate only the smallest insideheating area.BURNERSIZE 9"6" 12"