GE PCB975 Owner's Manual

Also see for PCB975: Owner's manual

Contents

GE PCB975 Owner's Manual Manual pdf 40 page image

ANTI-TIP DEVICE INSTALLATIONAn Anti-Tip bracket is supplied with instructionsfor installation in a variety of locations. Theinstructions include all necessary informationto complete the installation. Read the SafetyInstructions and the instructions that fit yoursituation before beginning installation.WARNING —• Range must be secured by Anti-Tip bracketsupplied.• If the Anti-Tip device supplied with therange does not fit this application, use theuniversal Anti-Tip device WB2X7909.• See instructions to install (supplied withbracket).• Unless properly installed, the range couldbe tipped by stepping or sitting on the door.Injury may result from spilled hot liquidsor from the range itself.240Installation InstructionsINSTALL THE RANGETypical installation of anti-tip bracket attachment to wallBracketScrew mustenter woodor metalWall plateLEVEL THE RANGEInstall the oven shelves in the ovenand position the range where it will beinstalled.Check for levelness byplacing a spirit level ora cup, partially filledwith water, on one ofthe oven shelves. Ifusing a spirit level, taketwo readings—with thelevel placed diagonally first inone direction and then the other.Adjust the front leveling legs from thebottom.Use an open-end or adjustable wrenchto adjust the leveling legs until the rangeis level.DCBA4LeglevelerLowerrangeRaiserangeSpirit levelADJUST THE REAR LEVELING LEGSMeasure the height of your countertopat the rear of the opening (X).Adjust two rear leveling legs so that therear of the cooktop is at the same heightas the counter (Y).Slide unit into place.CBA3XY