GE PFS23KSHAFSS Owner's Manual And Installation Instructions

Installation InstructionsREPLACING THE DOORS (Double Door Refrigerator Models only)FT1INSTALL CENTERHINGEInstall the center hinge on each side.I-_ REHANG REFRIGERATOR DOORSrA1 Lower the refrigerator door onto the centerhinge pin. Ensure that the plastic hinge pinthimble is on the center hinge pin or insidedoor hinge pin hole located in the bottomof the door.[]r61Securely tape the door shut with masking tapeor have a second person support the door.Route wires through bottom left hinge pin slot.Insert the top hinge pin into the hinge holeon top of the refrigerator door. Make sure thedoor is aligned with the cabinet and oppositedoor. Attach the hinge to the top of the cabinetloosely with the bolts.!BottomLeft HingePin Slot(appearance may vary)r_ On left-hand doors, pass the wires and waterline through the center hinge pin. Then connectthe water line and 4-pin connector.Center Hinge Pin4-PinConnector Water Line j[]] REHANG REFRIGERATOR DOORS (CONT.)r_ Make sure the gasket on the door is flushagainst the cabinet and is not folded. Makesure the door is straight and the gap betweenthe doors is even across the front. Whileholding the aligned door in place, tightenthe top hinge bolts. Replace the hinge coverand screw.TopHngeFB1REPLACE OPPOSITE DOORFollow the same procedure on the oppositedoor. There is no water line or hinge cover.F41ALIGN DOUBLE DOORSIf the top of the doors are uneven, first try toraise the lowest door by turning the leveling legon the same side as the door until the doorsare even. If the unit rocks, re-adjust the levelinglegs to the extent that the unit is stable.If the doors remain uneven, turn the adjustablepin to raise, or lower, the left door to matchthe right door. Use a 1/4" Allen wrench to turnthe pin.F51REPLACE FREEZER DRAWERRefer to the Replacing the Freezer Drawersection for instructions.29