49-80808 25CARE AND CLEANING: 2YHQ 'RRUVLift-Off Lower Oven DoorThe door is very heavy. Be careful when removing and lifting the door.'RQRWOLIWWKHGRRUE\WKHKDQGOHTo remove the door:1. Fully open the door.2. Pull the hinge locks down toward the door frame, tothe unlocked position. A tool, such as a small flat-blade screwdriver, may be required.3. Firmly grasp both sides of the door at the top.4. Close door to the door removal position. The doorshould be open approximately 3" with no obstructionabove the door.5. Lift door up and out until both hinge arms are clear ofthe slots.To replace the door:1. Firmly grasp both sides of the door at the top.2. Starting on the left side, with the door at the sameangle as the removal position, seat the indentation ofthe hinge arm into the bottom edge of the hinge slot.The notch in the hinge arm must be fully seated intothe bottom of the slot. Repeat for right side.3. Fully open the door. If the door will not fully open, theindentation is not seated correctly in the bottom edgeof the slot.4. Push the hinge locks up against the front frame of theoven cavity, to the locked position.5. Close the oven door.Removal positionHinge lockSlotPull hinge locks down to unlockPush hinge locks up to lockHingelockHingearmIndentationBottomedge ofslotHinge armOven DoorsLift-Off Upper Oven Door (for double oven)To remove the door:1. Fully open the door.2. Lift up on the hinge lock toward the oven frame untilthey stop.3. Close the door to 45 degrees (you will feel the doorstop). The hinge lock will contact the oven frame.4. On both sides of the door, press down on the releasebuttons on each hinge.5. Lift door up until it is clear of the hinge.6. Pull on hinge arms slightly to relieve pressure on thelocking tabs.7. Push the hinge locks down onto the hinge.8. Push the hinges in toward the unit so they are closed.To replace the door:1. Pull the hinges down away from the oven frame tothe fully open position.2. Lift up on the hinge locks toward the oven frame untilthey stop.3. The hinges will release to the 45-degree position. Thehinge locks will contact the oven frame.4. Slide the door back onto the hinges. Make sure thebuttons pop back out.5. Fully open the door.6. Push the hinge locks down onto the hinge.7. Close the oven door.Ovenframe 'RRUframeReleasebuttonsPull downPush in