7Empty the pan. Place the Chill/Thaw trayin the pan. Place the items on the trayand close the pan completely.Touch LED Dispenser Control:Select the ExpressThaw™, ExpressChill™or SelectTemp™ pad. The display and SETlight will come on. Tap the pad until thelight appears next to the desired setting.Use the following chart to determine thebest setting to use.■ ExpressChill can be set to 15, 30 or 45minutes. The default is 15 minutes.■ To stop a feature before it is finished:Touch LED Dispenser Control::Tap that feature’s pad until no optionsare selected and the display is off.■ During ExpressThaw andExpressChill,the display on thecontrols will count down the timein the cycle (on some models).■ After the ExpressThaw cycle iscomplete, the pan will reset to theMEAT setting (32°F [0°C]) to helppreserve thawed items until theyare used.■ The displayed actual temperature ofthe CustomCool pan may vary slightlyfrom the SET temperature based onusage and operating environment.NOTE: For food safety reasons, it isrecommended that foods be wrapped inplastic wrap when using ExpressThaw.This will help contain meat juices and improvethawing performance.About CustomCool ™. (on some models) GEAppliances.comThe CustomCool ™ feature is used to quicklychill items, thaw items or hold the pan at aspecific temperature. This feature is a systemof dampers, a fan, a temperature thermistorand a heater.The pan is tightly sealed to preventtemperature fluctuations in the rest ofthe refrigerator. The controls for this panare located on the dispenser with thetemperature controls.How to UseExpressThaw ™ExpressChill ™Touch LED Dispenser ControlHow it Works