23Inserting the door panels.Attach the Top Trim on the Freezer and Fresh Food Doors.The Top Trim can be found inside the refrigeratorcompartment.With a T-20 Torxdriver, attach the Top Trim, using twoscrews on each Top Trim piece, to the top of each door.Hand tighten only. Make sure that the top of each panelfits snugly behind the lip of the Top Trim.Insert the Freezer Panel and Fresh Food Panel.Carefully push the freezer panel in until it slidesinto the slot behind the door handle. Push the fillerpanel (required with some door panels) in behind thedecorator panel. Repeat for fresh food panel.If your model has a dispenser, this step only applies tothe fresh food panel and top freezer panel.Insert the Bottom Freezer Panel (on dispenser models).Carefully push the panel in until it slides into the slotbehind the door handle. Push the filler panel (requiredwith some door panels) in behind the decorator panel.Cut-OutCut-OutTop Trim ScrewsTopFreezerPanelBottomFreezerPanelSide TrimSide TrimFreshFoodPanelRead these instructions completely and carefully.Top Trim Screws
