GE PV970 Owner's Manual & Installation Instructions

Also see for Profile PV970: Owner's Manual & Installation Instructions Owner's Manual & Installation Instructions Owner's Manual & Installation Instructions Owner's manual and installation instructions

49-2000916 Rev. 0InstallationInstructionsIf you have questions, call GE Appliances at 800.GE.CARES (800.432.2737)or visit our website at: GEAppliances.comBEFORE YOU BEGINRead these instructions completely and carefully.Ŷ IMPORTANT – Save these instructionsfor local inspector’s use.Ŷ IMPORTANT – Observe all governingcodes and ordinances.Ŷ Note to Installer – Be sure to leave theseinstructions with the Consumer.Ŷ Note to Consumer – Keep these instructions forfuture reference.Ŷ Skill level – Installation of this vent hood requiresbasic mechanical and electrical skills.Ŷ Completion time – Approximately 1 to 3 hoursŶ Proper installation is the responsibility of theinstaller.Ŷ Product failure due to improper installation is notcovered under the Limited Warranty.PRODUCT DIMENSIONSChimney Vent HoodINSTALLATION INSTRUCTIONSCAUTION Due to the weight and size ofthese vent hoods and to reduce the risk of personalinjury or damage to the product, TWO PEOPLEARE REQUIRED FOR PROPER INSTALLATION.FOR YOUR SAFETY:WARNING Before beginning the installation,switch power off at service panel and lock theservice disconnecting means to prevent power frombeing switched on accidentally. When the servicedisconnecting means cannot be locked, securelyfasten a prominent warning device, such as a tag, tothe service panel.30” Models Require a 30” Wide Opening”*Height toceiling” 29´10-7´13-1´2-”*Height to CeilingVented RecirculatingMin ´ ´Max ´ ´´ ´´´36” Models Require a 36” Wide Opening* For supplied duct cover ceiling heights for vented installation andrecirculating installation, refer to the table on page 13.´Allow 1” overlapof duct.´*Height to CeilingVented RecirculatingMin ´ ´Max ´ ´´*Height toCeiling