GE PVM9195 Installation Instructions Manual

Also see for PVM9195: Use and care manual Installation instructions Installation instructions Owner's manual Owner's manual

Contents

GE PVM9195 Installation Instructions Manual Manual pdf 15 page image

OUTSIDE BACK EXHAUST (Horizontal Duct)PREPARING THE REAR WALLFOR OUTSIDE BACK EXHAUSTB1INSTALLATION OVERVIEWB1. Prepare Rear WallB2. Attach Mounting Plate to WallB3. Prepare Top CabinetB4. Adjust BlowerB5. Mount the OvenInstallation InstructionsB15ATTACH THE MOUNTING PLATETO THE WALLB2Attach the plate to the wall using toggle bolts. At leastone wood screw must be used to attach the plate toa wall stud.Remove the toggle wings from the bolts.Insert the bolts into the mounting plate throughthe holes designated to go into drywall and reattachthe toggle wings to 3ø4s onto each bolt.12You need to cut an opening in the rear wall for outsideexhaust. Read the instructions on the REAR WALL TEMPLATE. Tape it to the rear wall, lining up with the holespreviously drilled for holes A and B in the wall plate. Cut the opening, following the instructions of theREAR WALL TEMPLATE.1” = 2.5 cm; 1’ = 0.3 m