GE Profile P2B918SEMSS Owner's Manual & Installation Instructions

Also see for P2B918: Owner's Manual & Installation Instructions Owner's Manual & Installation Instructions Owner's manual and installation instructions

Burner Heads (on some models)Place burner heads over the electrodeson the cooktop, in the correct locationsaccording to their size. There is one small, onemedium, one large and one extra large burnerhead.Oval (Center) Burner Head/Cap AssemblyPlace the oval (center) head/cap assemblyover the electrode on the cooktop.CapsPlace the matching size caps onto the burnerbases or heads.Make sure that the heads and caps arereplaced in the correct locations.GratesPlace the left, right and center grates on thecooktop. These grates are position specific.The undersides of the left and right gratesare marked “LEFT FRONT” and “RIGHT FRONT.”Place the middle grate with its bowed fronttoward the front of the range.CAUTION:Do not operate the burnerwithout all burner parts in place.Check Ignition of Surface BurnersOperation of all cooktop burners should be checkedafter the range and gas supply lines have beencarefully checked for leaks.Electric IgnitionSelect a top burner knob and simultaneouslypush in and turn to LITE position. You will heara clicking sound indicating proper operation ofthe spark module. Once the air has been purgedfrom the supply lines, burners should light within4 seconds. After burner lights, rotate knob out ofthe LITE position. Try each burner in successionuntil all burners have been checked.50Installation of the range.Seal the OpeningsSeal any openings in the wall behind the range andin the floor under the range when hookups arecompleted.Assemble Surface BurnersOperating Instructions Safety InstructionsInstallationInstructionsTroubleshooting TipsConsumer SupportMedium headFront of rangeLarge headSmall headExtra largeheadElectrodeSlotFront of rangeOval head and capassemblyMedium capFront of rangeLarge capSmall capExtra largecapMake sure the slot inthe burner head ispositioned over theelectrode.Left Front Right FrontCenterMake sure the slotin the burner headis positioned overthe electrode.Electrode Slot