GE Refrigerator Owners And Installation Manual

Also see for 21: Owner's manual Use and care & installation guide Use and care & installation guide Owner's manual Use and care & installation guide

Contents

37Turn the water On at the shutoff valve.Tighten any connection that leaks.Replace the access cover and tighten all screws(on some models).Turn the Water OnPlug in the refrigerator to the Power Outletand turn On.IMPORTANT: Always operate the Refrigerator froma power source of the same Voltage, Frequency andRating as indicated on the Refrigerator IdentificationPlate. Operate the Refrigerator from an Earthed(Grounded) 3 Pin Power Outlet fully accessible whenthe refrigerator is located in its normal operatingposition.Arrange the coil of tubing so that it does notvibrate against the back of the refrigerator oragainst the wall.Push the refrigerator back to the wall, making surethe power cord and the water line tubing are nottrapped, entangled or squashed by the refrigerator(including the wheels) or wall.Plug In the RefrigeratorSet the icemaker power switch to the I position.The icemaker will not begin to operate until it reachesits operating temperature of –9°C or below. It willthen begin operation automatically if the icemakerpower switch is in the I position.NOTE: In lower water pressure conditions, the watervalve may turn on up to 3 times to make sure enoughwater reaches the icemaker.Start the IcemakerPowerswitch

/ 38

Related manuals for GE 21