YOUR TOUCH CONTROL PANEL —The Touch Control Panel allows you to set the ovencontrols with the touch of a finger. It’s designed tobe easy to use and understand.1. DISPLAY. Displays time of day, time countingdown during cooking functions, power level,cooking mode and instructions.2. TIME DEFROST. Gentle thawing at automaticpower level 3 (Low). If desired, you may changepower level after entering defrosting time.3. TIME COOK I & II. Microwave for a presetamount of time using automatic power level 10(High), or change power level after enteringcooking time.4. MINUTE/SECOND TIMER. This feature uses nomicrowave energy. It functions as either a kitchentimer, as a holding period after defrost or as a delaytimer before time cooking.5. CLOCK. Touch this pad to enter time of day orcheck time of day while microwaving.To set clock, first touch CLOCK pad and then entertime of day. For example, if time is 1 :30, touchnumber pads 1, 3, and O and “ 1 :30” will appear indisplay. Then touch START pad. To reset or changetime, simply repeat above process.6. NUMBER PADS. Touch these pads to entercooking/defrosting time, power level and time ofday.7. POWER LEVEL. Touch this pad before enteringanother power level if you want to change fromautomatic power level 10 (High) for cooking orpower level 3 (Low) for defrosting.8. CLEAWOFF. When touched, it shuts off the ovenand erases all settings (except time of day).9. START. After all selections are made, touch thispad to start the oven.When You Plug in the Oven Program CookingThe display panel lights up. After 15 seconds, all Use your Touch Control Panel to Time Defrostlights disappear and “RESET” appears. Touch the or Time Cook with choice of power levels fromCLOCK pad to set the clock and oven is ready for use. 1 (lowest) to 10 (highest), time kitchen tasks withIf power is disrupted at any time, the above sequence the Minute/Second Timer, and set the Clock.recurs, and you must reset the Clock. Create your own programs to suit your individualcooking style. For example: use the Minute/SecondTimer to delay the start of Time Cook I & II orprogram a hold time between Time Defrost and TimeCook I & II. Set Time Cook I & II for a two-stageprogram using different times and power levels.8