GE Spacemaker DSXH43D Owner's Manual

Contents

GE Spacemaker DSXH43D Owner's Manual Manual pdf 11 page image

ELECTRICAL CONNECTIONINFORMATION FORELECTRIC DRYERSInstallation InstructionsWARNING – To reduce the risk offire, electric shock or personal injury:• DO NOT USE AN EXTENSION CORD WITHTHIS APPLIANCE.• THIS APPLIANCE MUST BE PROPERLYGROUNDED.This dryer must be electrically grounded in accordancewith local codes and ordinances, or in the absence of localcodes, in accordance with the NATIONAL ELECTRICALCODE, ANSI/NFPA NO. 70 or in Canada CSA C22.1Canadian Electrical Code Part 1.Electrical Requirements• This dryer must be connected to a 208V or 240Vindividual branch circuit, protected by 30-amp circuitbreakers or time-delay fuses.• Power supply: 3-wire 240-volt, single-phase, 60-Hz,Alternating Current. (Canada–240 volt, single-phase,60-Hz Alternating Current.)• Use copper conductors only.• If the electric supply does not meet the abovespecifications, call a licensed electrician.NOTE: A wiring diagram is located under the top panel.ELECTRICAL CONNECTIONINFORMATION FOR GAS DRYERSWARNING – To reduce the risk offire, electric shock or personal injury:• DO NOT USE AN EXTENSION CORD OR ANADAPTER PLUG WITH THIS APPLIANCE.• DO NOT, UNDER ANY CIRCUMSTANCES, CUT ORREMOVE THE THIRD GROUNDING PRONG FROMTHE POWER CORD.This dryer must be electrically grounded in accordancewith local codes and ordinances, or in the absence of localcodes, in accordance with the NATIONAL ELECTRICALCODE, ANSI/NFPA NO. 70 or in Canada, CSA C22.1Canadian Electrical Code Part 1.Electrical Requirements• This dryer must be supplied with 120V, 60-Hz,and connected to a properly grounded branchcircuit, protected by a 15- or 20-amp circuit breakeror time-delay fuse.• If the electric supply provided does not meet theabove specifications, it is recommended that a licensedelectrician install an approved outlet.External Ground (if required)An external ground wire (not provided), which meets localcodes, may be added by attaching it to the green groundscrew on the rear of the dryer in the upper left cornerabove the cord, and to grounded metal cold water pipe orother established ground.NOTE: A wiring diagram is located under the top panel.Attach ground wire(obtain locally)Ensure proper groundexists before use11Read these instructions completely and carefully.