Shelf PositionsC..3. Pull the drawerpart-wayout.Reach in, push the rearof the glassup and, at the same time, push itback until it clears the front comerretainegs.4. Tilt and remove the cover.5. Pull the drawer forward, lift thefront to clear stops, and remove thedrawer. If the refrigerator doordoesn’t open completely, pull thedrawer out until it hits the door.Then lift the drawer up until it ishigher than the drawer supports,tilt it and take it out.h If tape holds Convertible MeatFan cover to dmwer supports,remove the tape. Pull drawerpartway out. Reach in, push therear of the glass up and, at the sametime, back, until it clears front-comer retainers.7. Tilt and remove the cover.& Tilt and remove the drawer.After cleaning, replace in reverseorder.9. Reinstall the gasket at the rear ofthe Moist ‘n Fresh drawer. Fit theend of the plastic drawer supportinto the slot on the gasket, with therubber gasket flap fhcing you. Makesure the gasket snaps into place.Sealed Snack _PackiIIThe Sealed Snack Pack-andshelf to which it is attached-canbe relocated within the Fresh Foodcompartment. The sealed drawerretains high humidity for convenientstorage of meats and cheese, bacon,hors d’oeuvres, spreads and snacks.11How to RearrangeYourShelvesAd@stable ShelvesShelves in the fresh food andfi=eezercompartmentsare adjustable,enabling you to make efficient shelfarrangements to fit your family’sfd storage needs.lkmpered Glass Shelves inIkesh Food CompartmentqTo remove shelves: Tilt shelf upat front, then lift it up and out oftracks on rear wall of refrigerator.pll,p,ug~p+q E gage~ Lower to Ilock into place +11 ~,zI 11411To relocate shelves: Select desiredshelf height. With shelf front raisedslightly, engage top lugs in tracks atrear of cabinet. Then lower front ofshelf until it locks into position.