GE XL44 JGBS09 Owner's Manual & Installation Instructions

GE XL44 JGBS09 Owner's Manual & Installation Instructions Manual pdf 22 page image

Turn all controls OFF before removing theburner parts.The burner grates, caps and burner heads can belifted off, making them easy to clean.For proper ignition,make sure the smallhole in the section thatfits over the electrodeis kept open. A sewingneedle or wire twist-tieworks well to unclog it.The slits in the burner heads of your rangemust be kept clean at all times for an even,unhampered flame.You should clean the surface burners routinely,especially after bad spillovers, which could clogthese openings.To remove burned-on food, soak the burner headsin a solution of mild liquid detergent and hot waterfor 20-30 minutes. For more stubborn stains, use atoothbrush.Before putting theburner head back,shake out excess waterand then dry itthoroughly by settingit in a warm oven for30 minutes.Replace the burnerheads and caps. Makesure that the heads andcaps are replaced in the correct location. There is oneoval (center) head and cap assembly and fourmedium (side) heads and caps.NOTE: Before removing the burner heads andcaps, remember their size and location. Replacethem in the same location after cleaning.The electrode ofthe spark igniter isexposed when theburner head isremoved. When oneburner is turned to LITE, all the burners spark.Do not attempt to disassemble or clean aroundany burner while another burner is on. Anelectric shock may result, which could causeyou to knock over hot cookware.Burner Assemblies Burner HeadsElectrodeLift off when cool. Wash burner caps in hot, soapywater and rinse with clean water. You may scour witha plastic scouring pad to remove burned-on foodparticles.Dry them in a warm oven or with a cloth—don’treassemble them wet. Replace the side burner caps.CARE AND CLEANING(continued)CAUTION: DO NOT OPERATE THE BURNER WITHOUT ALL BURNER PARTS IN PLACE.Side grateBurner capBurner headBurner CapsMediumburnerheadand cap22ElectrodeAfter cleaning, make surethe slot in the burner head ispositioned over the electrode.Mediumburnerheadand capMediumburnerheadand capMediumburnerheadand capOval head and capassemblyCenter grateBurner head andcap assemblyElectrodeFront of RangeSlotSlotElectrode