GE ZET1P Owner's Manual

Also see for Monogram ZET1P: Owner's manual Owner's manual Owner's manual Owner's manual Owner's manual

Contents

GE ZET1P Owner's Manual Manual pdf 20 page image

20How to setthe oven forconvectionroasting withthe probeSee the Convection roasting tips section.1 Place the rack in the desired rack position andinsert the probe into the meat.2 Plug the probe into the outlet in the oven. Makesure it is pushed all the way in.Close the oven door.3 Push the PROBE button.NOTE: On double wall oven models, the ovencontrol will automatically set the oven that hasthe probe plugged into it.4 Turn the Mini-Knob to select and push itto enter the desired internal food or meattemperature. The minimum and maximuminternal temperatures for the food that you canenter are 100°F to 200°F.“PROBE” will flash in the display if the probeis inserted into the outlet and you have notentered a probe temperature.5 Turn the Oven Mode knob to CONVECTIONROAST.6 Using the Temperature knob, set the desiredoven temperature, in 25°F increments, from200°F to 550°F.The oven and the oven interior lights will turnon immediately and stay on until the oven isturned off.The convection fan will turn on (after a shortdelay), the PROBE light will turn on and 100°Fwill appear in the display. (The temperaturedisplay will start to change once the internaltemperature of the meat reaches 100°F.)Convection Roasting with the ProbeWall OvenTemperature knobMini-KnobTurn to selectPush to enterPush to selectDouble oven display shown.CAUTION: To preventpossible burns, do not unplug the probe fromthe oven outlet until the oven has cooled. Donot store the probe in the oven.7 When the internal temperature of the meatreaches the number you have set, the probeand the oven turn off, END will show inthe display and the oven control will beep.(PROBE will remain lit along with the probetemperature.) To stop the reminder beep, turnthe Oven Mode knob and the Temperature knobto OFF or push the Mini-Knob. Use hot pads toremove the probe from the food. Do not useWRQJVWRSXOORQLW³WKH\PLJKWGDPDJHLW“PROBE” will flash in the display until the probeis removed from the oven receptacle.To change the set internal food or meat (probe)temperature during the Roast cycle, push thePROBE button, turn the Mini-Knobto select the new temperature and push to enterit.• If the probe is removed from the food beforethe final temperature is reached, a tone willsound and the display will flash until the probeis removed from the oven.• You can use the timer even though you cannotuse timed oven operations.Oven Mode knob