GE ZV800SJSS Technical Service Manual

Also see for MONOGRAM ZV800BJBB: Dimensions and specifications

Contents

– 6 –Technical DataZV800SJSS, ZV800BJBBElectrical SpecificationsThis information is intended for use by persons possessing adequate backgrounds of electrical, electronicand mechanical experience. Any attempt to repair a major appliance may result in personal injuryand property damage. The manufacturer or seller cannot be responsible for the interpretation of thisinformation, nor can it assume any liability in connection with its use.WARNING: Disconnect power before servicing!IMPORTANT: Disconnect ALL grounding devices.All parts of this appliance capable of conducting electrical current are grounded. If grounding wires, screws,straps, clips, nuts or washers used to complete a path to ground are removed for service, they must bereturned to their original position and properly fastened.GROUNDING SPECIFICATIONS:Ground Path Resistance 0.10 Ω Max.Insulation Resistance 250 Ω Min.INSTALLATION REQUIREMENTS:Electrical Supply - The hood must be connected to an individual, properly grounded branch circuit of 120V, 60 Hz., and protected by a 15- or 20-amp circuit breaker or time delay fuse. Wiring must be 2- wire withground. Wire size must conform to the National Electrical Code or the prevailing local code. Refer to therating plate located on the left side, visible when filters are removed.WARNING: Improper connection of aluminum house wiring to copper leads can result in a serious problem.Use only connectors designed for joining copper to aluminum, and follow the manufacturer’s recommendedprocedure closely.