GF 582 Instruction Manual

Also see for 582: Instruction manual Operating instructions

Contents

Instruction manual Installation37Type „Radial installation and removal“: Loosen the coupling nut and slide it on the intended pipe end. Connect the connection parts with the pipe ends. For instructions concerning the differentconnection types, see planning fundamentals. Put pressure reducing valve type 582/pressure retaining valve type 586 between theconnection parts. Tighten the coupling nuts by hand.„Spigot ends“: If adapted to flange version, observe the tightening torques of the flanges, see „GeorgFischer planning fundamentals“.In order to protect against soiling and premature wear and tear by erosion, werecommend installing a strainer on the inlet side of pressure reducing valve type582/pressure retaining valve type 586.Cemented connection Only join identical materials. After the curing time of the joint has elapsed, rinse the pipe section as quickly as possiblewith pressure-less water, see Chapter „Jointing techniques” in the „Georg Fischerplanning fundamentals”Welded connection Only join identical materials, see Chapter „Jointing techniques” in the „Georg Fischerplanning fundamentals”.