31Power CutThe appliance bridges a power cut of up to5 minutes. The operation continues.After a longer power cut the appliance will switchoff the operation. The x symbol appears on thedisplay and three dashes instead of thetemperature.Switch off the temperature knob and switch theappliance back on.The “first settings” menu reappears if the applianceis without electricity for several days. You have toset the clock.Note: The basic settings remain stored even if theappliance is without electricity for several days.If an oven light fails, it must be replaced. Heat-resistant replacement bulbs can be obtained fromthe after-sales service or specialist shops. Only usethese bulbs.$ Warning, risk of burns! Oven lights get very hotduring use. Only replace the oven light when it iscold.Disconnect the appliance from the electricity beforereplacing the light (switch off the household fuse orthe circuit breaker in the fuse box).1 Loosen the screw on the lamp cover.Tilt down the lamp cover.2 Pull out the bulb. Push the new bulb in firmly.Make sure that the pins are in the correctposition.Note: Only use a heat-resistant halogen bulb ofthe same type (60 W / 230 V / G9).Do not touch the halogen lamp with your hands.Use a dry cloth.3 Tilt the lamp cover up and screw it back on.4 Switch the circuit breaker back on.---Replacing the Oven Light