Gaggenau BOP 210/211 Instruction Manual

Gaggenau BOP 210/211 Instruction Manual Manual pdf 24 page image

24Trouble shootingMalfunctions often have simple explanations. Pleaseread the following notes before calling the after-salesservice.ã Risk of electric shock!Incorrect repairs are dangerous. Repairs may only becarried out by one of our trained after-sales engineers.If the appliance is faulty, unplug the mains plug orswitch off the fuse in the fuse box. Contact the after-sales service.--------Power cutYour appliance can bridge a power cut of a fewseconds. Operation continues.If the power cut was for a longer period and theappliance was in operation, a message appears in thedisplay. Operation is interrupted.Set the function selector to 0, then the appliance canbe operated again as usual.Demo modeIf the ° symbol appears in the display, the demomode is activated. The appliance does not heat up.Briefly disconnect the appliance from the mains(switch off the household fuse or the circuit breaker inthe fuse box). Following this, deactivate the demomode in the Basic settings within 3 minutes (refer tothe Basic settings section.Disruption Possible cause SolutionAppliance not working, no display Plug not inserted Connect the appliance to the electricitymainsPower failure Check whether other kitchen appliancesare workingFuse defective Check in the fuse box whether the fusefor the appliance is in working orderOperating error Switch off the fuse for the appliance inthe fuse box and switch it on again afterabout 60 secondsAppliance cannot be started Appliance door is not quite closed Close appliance doorAppliance does not work, display doesnot respond. 0 appears in the displayChild lock activated Deactivate the child lock (refer to Childlock section)Appliance switches off on its own Safety shut-off: the appliance has notbeen operated for longer than 12 hoursConfirm the message with ™, switch offthe appliance and set it again.Appliance does not heat up, ° appearsin the displayAppliance is in demo mode Deactivate the demo mode in the basicsettingsError message "Exxx" If an error message is displayed, turnthe function selector to 0; if the displaygoes out, there was a non-recurringproblem. If the error occurs repeatedlyor the display remains on, please con-tact the after-sales service and informthem of the error code.