Gaggenau BS 464 610 Use And Care Manual

Also see for BS 464 610: Use and care manual Installation instructions

Contents

Gaggenau BS 464 610 Use And Care Manual Manual pdf 20 page image

20Timer functionsIn the timer menu, set:Š Timerp Stopwatch6 Cooking time (not in the idle state)5 Cooking time end (not in the idle state)Launching the timer menuYou can launch the timer menu from any mode. Onlyfrom the factory settings, program selection is set toS, the time menu is not available.Touch the M symbol.The timer menu appears.TimerThe timer runs independently of the other appliancefunctions. You can enter a maximum of 90 minutes.Setting the timer1 Call up the Timer menu.The "Timer" function Š is displayed.2 Turn the rotary selector to set the desired time.3 Start with I.The Timer menu closes and the timer starts to run.The symbol for the timer Š appears on the display andthe time can be seen counting down.A signal sounds once the time has elapsed. Theaudible signal ceases if you touch the ™ symbol.You can exit the Timer menu at any time by touchingthe ' symbol. This way, the settings are lost.Suspend timer:Call up the Timer menu. Select the "Timer" functionwith C, select Š, and touch the H symbol. To let thetimer run on, touch the I symbol.Switch off the timer early:Call up the Timer menu. Select the "Timer" functionwith C, select Š, and touch the Ž symbol.StopwatchThe stopwatch runs independently of the otherappliance functions.The stopwatch counts up from 0 seconds to 90minutes.It has a pause function. Therefore, you can stop thetimer in between times.Starting the stopwatch1 Launch the timer menu.2 With C, select the "Stopwatch" function p.3 Start with I.7LPHU6WRSZDWFK