Gaggenau BS 464 610 Use And Care Manual

Also see for BS 464 610: Use and care manual Installation instructions

Contents

Gaggenau BS 464 610 Use And Care Manual Manual pdf 25 page image

25Personal recipesYou can save up to 50 individual recipes. You canrecord a recipe. You can assign these recipes a nameso that you can fall back on them quickly andconveniently if you need them.Recording a recipeYou can set up to five phases in succession and youcan record them.1 Set the program selection to the required heatingfunction.The i symbol is displayed.2 Touch the i symbol.3 Choose a free storage location with the rotaryselector.4 Touch the g symbol.5 Set the desired temperature with the rotaryselector.6 The cooking time is recorded.7 Recording another phase:Set the program selection to the required heatingfunction. Set the required temperature with therotary selector. A new phase begins.8 Once the appliance has achieved the desiredcooking result, touch the & symbol to end therecipe.9 Enter the name under "ABC" (see Section entitledEntering names).Notes‒ Recording a phase does not begin until theappliance has reached the set temperature.‒ Every phase must last at least one minute.‒ During the first minute you can change theheating function or the temperature.Enter the core temperature for a phase:Insert the core temperature probe in the socket in theoven interior. Set the heating function andtemperature. Touch the + symbol. With the rotaryselector, enter the required temperature and confirm itwith +.Programming a recipeYou have the option of programming and saving up tofive phases of preparation.1 Set the program selection to the required heatingfunction. Set the required temperature with therotary selector.The i symbol is displayed.2 Touch the i symbol.3 Choose a free storage location with the rotaryselector..4 Touch the % symbol.5 Enter the name under "ABC" (see Section entitledEntering names).6 Choose the first phase with the C symbol.The heating function and temperature set at thestart are displayed. You can change the heatingfunction and temperature with the rotaryselectors.7 Choose the time setting with the C symbol.8 Set the required cooking time with the rotaryselector.9 Choose the next phase with the C symbol.- or -Preparation is complete, end input.10 Save with ™.- or -Cancel with ' and quit the menu.Enter the core temperature for a phase:Choose the next phase with the C symbol. Set theheating function and temperature. Touch the +symbol. With the rotary selector, enter the requiredtemperature and confirm it with +.Note: For phases for which a core temerature hasbeen programmed you cannot set a cook time.))