Gaggenau BSP 220 Instruction Manual

Also see for BSP 220: Instruction manual Manual

Gaggenau BSP 220 Instruction Manual Manual pdf 16 page image

16en Time-setting optionsThe timer menu is closed and the timing begins. The psymbol and the elapsed time are shown in the display.Pausing and restarting the stopwatch1 Call up the timer menu.2 Touch C to select the p "Stopwatch" function.3 Touch the H symbol.The time stops. The symbol changes to I Start.4 Touch I to start.The time continues to run. When 90 minutes is reached,the display pulsates and signal sounds. The signal stopswhen you touch the ™ symbol. The p symbol on thedisplay goes out. The process has finished.To switch off the stopwatch:Call up the timer menu. Touch C to select the p"Stopwatch" function and touch the Ž symbol.Cooking timeIf you set a cooking time for your meal, the applianceswitches off heating automatically after the selectedtime.You can set a cooking time from 1 minute to 23 hours59 minutes.Setting the cooking timeYou have set the type of heating and temperature andplaced your food in the cooking compartment.1 Touch the M symbol.2 Use C to select the 6 "Cooking time" function.3 Set the required cooking time using the rotaryselector.4 Press I to start.The appliance starts. The Timer menu closes. Thedisplay shows the temperature, operating mode,remaining cooking time and cooking time end.One minute before the end of the cooking time, theelapsed cooking time is shown enlarged on the display.Once the cooking time has elapsed, the applianceswitches off. The 6 symbol flashes and an audiblesignal sounds. The signal stops early if you touch the ™symbol, open the appliance door, or set the functionselector to 0.Changing the cooking time:Call up the Timer menu. Use C to select the 6"Cooking time" function. Use the rotary selector tochange the cooking time. Press I to start.To cancel the cooking time:Call up the Timer menu. Use C to select the 6"Cooking time" function. Cancel the cooking time withŽ. Press ' to return to normal operation.To cancel the entire procedure:Set the function selector to 0.Note: You can also change the type of heating andtemperature while the cooking time elapses.6WRSZDWFK&RRNLQJWLPH