Gaggenau BSP 220 Instruction Manual

Also see for BSP 220: Instruction manual Manual

Gaggenau BSP 220 Instruction Manual Manual pdf 22 page image

22en Basic settingsQBasic settingsBasicsettingsYour appliance can be individually adjusted in the basicsettings.1 Turn the function selector to S.2 Select "Basic settings" using the rotary selector.3 Touch the ™ symbol.4 Turn the rotary selector to select the required basicsetting.5 Touch the % symbol.6 Set the basic setting using the rotary selector.7 Save with ™ or cancel with ' and exit the currentbasic setting.8 Turn the function selector to 0 to exit the basicsettings menu.The changes are saved.Basic setting Permitted settings ExplanationBrightness Level 1, 2, 3, 4, 5*, 6, 7, 8 Sets the display brightnessStandby screen On*/Off- Clock- Clock + GAGGENAU logo*- Date- Date + GAGGENAU logo- Clock + date- Clock + date + GAGGENAU logoAppearance of the standby screen.Off: No display. Use this setting to reducethe standby consumption of your appliance.On: Several displays can be set, confirm"On" with ™ and use the rotary selector toselect the desired display.The selection is displayed.Display Reduced*/Standard If the 'Reduced' setting has been selected,only the most important information will beshown on the display after a short time.Touch field colour Grey* / White Selects the colour of the symbols on thetouch fieldsTouch field tone Tone 1* / Tone 2 / Off Selects an audible signal for when a touchfield is touchedTouch field tonevolumeLevel 1, 2, 3, 4, 5*, 6, 7, 8 Sets the volume of the touch field tonePreheating signal On* / Off The signal tone sounds when the cookingcompartment has heated up to the requiredtemperature.Signal volume Level 1, 2, 3, 4, 5*, 6, 7, 8 Sets the volume of the audible signalWater hardness 1-18 Use the test kit included to test the waterhardness of your mains water. Set the meas-ured water hardness.Time format AM/PM / 24 h* Display the clock in 24 or 12 hour formatTime Current time Setting the clockClock change Manual* / Automatic Automatically changes the clock to daylight-savings time. If automatic: Setting themonth, day and week for when the timeshould be changed over. To be set for bothsummer and winter time.Date format D.M.Y*D/M/YM/D/YSets the date format