Gaggenau EB 333 Instruction Manual

Also see for EB 333: Installation instruction Use and care manual

Contents

15Activating the appliance enActivating the applianceActivatingtheappliance StandbyThe appliance goes into standby mode if no functionhas been set or the child lock is activated.The brightness of the control panel is dimmed instandby mode.Notes– Different displays are available for standby mode.The default setting is the GAGGENAU logo and theclock. To change the display, refer to the Basicsettings section.– The brightness of the display depends on thevertical viewing angle. You can adjust the displayusing the "Brightness" setting in the basic settings.Activating the applianceTo exit standby mode, you can either▯ Turn the function selector,▯ Touch a control panel,▯ Open or close the door.You can now set the desired function. You can readabout how to set functions in the respective chapters.Notes– When "Standby screen = off" is selected in thebasic settings, you must turn the function selectorto exit standby mode.– The appliance returns to the standby screen if youhave not made any settings for a long time afteractivation.– When the door is open, the interior lightingswitches off after a short time.