Gaggenau EB 333 Instruction Manual

Also see for EB 333: Installation instruction Use and care manual

Contents

24en Core temperature probeSetting the core temperature1 Insert food into the oven interior with the coretemperature probe inserted. Insert the coretemperature probe in the socket in the oven interiorand close the appliance door.Do not jam the core temperature probe's cable!+ and the current core temperature appear in thedisplay.2 Set the function selector to the required heatingmode.3 Set the oven interior temperature with the rotaryselector.4 Touch the + symbol. With the rotary selector, setthe required core temperature and confirm it with+.The set core temperature must be higher than thecurrent core temperature.5 The appliance heats with the set heating mode.The current core temperature is displayed and,under it, the set core temperature.You can change the set core temperatur at any time.A signal sounds when the set core temperature in thefood has been reached. The cooking mode is endedautomatically. Confirm with ™ and turn the functionselector to 0.Notes– The measurable range is 15 °C to 99 °C. Outsidethe measurable area, "--°C" is displayed for thecurrent core temperature.– If you leave food in the cooking compartment forsome time after cooking, the core temperaturecontinues to rise somewhat due to the residual heatin the cooking compartment.– If you set the core temperature probe and thecooking timer at the same time, the applianceswitches off whichever programme reaches theentered value first.Changing the set core temperature:Touch the + symbol. Use the rotary selector to changethe set core temperature for the food and confirm with+.Deleting the set core temperature:Touch the + symbol. Delete the set core temperaturewith Ž. The appliance continues heating in normalcooking operation.