Gaggenau RB472704 Instruction Manual

Also see for RB472704: Installation instructions Instruction manual

19Operating the appliance en-usSetting the touch field color1. Press à button to open the main menu.2. Press B button to move to the menu item Basicsettings.3. Press ™ button.4. Press C button to move to the menu item Touch fieldcolor.5. Press % button.6. Press B C buttons to move to the required setting.7. Press ™ button.The setting is saved.8. Press ' button to exit the menu.Setting the touch field tone type.You can change or switch off the sound of the tonesgenerated when pressing keys.1. Press à button to open the main menu.2. Press B button to move to the menu item Basicsettings.3. Press ™ button to open the menu item.4. Press C button to move to the menu item Touch fieldtone type.5. Press % button to open the menu item.6. Press B C buttons to select the required setting.7. Press ™ button.The setting is saved.8. Press ' button to exit the menu.Setting the touch field tone volumeYou can adjust the volume level of the sounds generatedwhen pressing keys.1. Press à button to open the main menu.2. Press B button to move to the menu item Basicsettings.3. Press ™ button to open the menu item.4. Press C button to move to the menu item Touch fieldtone volume.5. Press % button to open the menu item.6. Press B C buttons to select the required setting.7. Press ™ button.The setting is saved.8. Press ' button to exit the menu.Setting the signal tone volumeYou can adjust the volume level of the signal tonesgenerated e.g. with alarms.1. Press à button to open the main menu.2. Press B button to move to the menu item Basicsettings.3. Press ™ button to open the menu item.4. Press C button to move to the menu item Signal tonevolume.5. Press % button to open the menu item.6. Press B C buttons to select the required setting.7. Press ™ button.The setting is saved.8. Press ' button to exit the menu.Switching the water filter counter onand offIf you have replaced the water filter with a particle filter,switch the water filter counter off. It is not needed in thiscase as the particle filter does not have to be replaced.1. Press à button to open the main menu.2. Press B button to move to the Basic settings menu.3. Press ™ button.4. Press C button to move to the menu item Water filtercounter.5. To change the setting, press % button.6. Confirm the selection by pressing ™ button.Dimming when door is opened andclosedIf dimming is switched on, the light will slowly becomebrighter when the door is opened, and then slowly darkerwhen it is closed.Switching dimming on or off when opening and closingthe door1. Press à button to open the main menu.2. Press B button to move to the menu item Basicsettings.3. Press ™ button.4. Press C button to move to the menu item Dimmingwhen door is opened and closed.5. Press % button.6. Press C button to move to the menu item On orOff.Confirm by pressing ™ button.