22en-us AlarmSwitching on Push-to-open systemIn an installation situation without handles you can selectthe Push-to-open system. Your appliance will then open acrack if you press lightly on the door.Note: Please note that automatic door opening isdisabled if Rest mode is activated.1. Open menu item Automatic door opening of therefrigerator or the freezer compartment.2. Select menu item Push-to-open system.3. Press ™ button.4. Select menu item Opening force. Here you can selectthe level of force required to activate automatic dooropening.5. Select menu item Opening duration. Here you canselect how long the door should remain open a crackbefore it closes again automatically.Note: If the door only remains open a crack, theappliance checks once a second whether the door isstill ajar.After the selected opening duration elapses,the appliance will close the door automatically.Switching on Pull-to-open systemIn an installation situation with handles you can select thePull-to-open system. Your appliance will support you inopening the door as soon as you pull on the handle.1. Open menu item Automatic door opening of therefrigerator or the freezer compartment.2. Select menu item Pull-to-open system.3. Press ™ button.4. Select menu item Opening force. Here you can selectthe level of force required to activate automatic dooropening.Switching off automatic door opening1. Open the menu item Automatic door opening.2. Select menu item Off.3. Press ™ button.Switching Prevent condensation on oroffThis function is only available with 3-door appliances.3-door appliances are equipped with a door pillarfeaturing condensation protection.You can open the left-hand door of the refrigeratorcompartment without opening the right-hand doorbeforehand.9 CAUTIONNever unfold the door pillar when the door is open!It can get jammed when closing the door andbecome damaged, or itself damage the front panelof the right-hand door.A heater is built into the door pillar to preventcondensation. Switching condensation protection on oroff switches the heater on and off .1. Press à button to open the main menu.2. Press B button to move to the menu item Basicsettings.3. Press ™ button.4. Press B button to move to the menu item Preventcondensation.5. To change the setting, press % button.Home networkYou can use this function to establish a connectionbetween the refrigerator and your mobile device.~ "Home Connect" on page 23Automatic display lock for cleaningYou can use this function to select whether the automaticclean lock is switched on automatically when the door isopened.1. Press à button to open the main menu.2. Press B button to move to the menu item Basicsettings.3. Press ™ button.4. Press B button to move to the menu item Automaticdisplay lock for cleaning.5. To change the setting, press % button.M AlarmAlarmDoor alarmIf the appliance door is open for a long time, the dooralarm (continuous audible signal) switches on.▯ Close door.The audible warning signal is switched off.