Gaggenau RB472704 Instruction Manual

Also see for RB472704: Instruction manual Installation instructions

21Operating the appliance en-usSwitching rest mode on1. Press à button to open the main menu.2. Press / button to open the view Rest mode duration.3. Press A/@ buttons to change the duration.4. Press I button to start.The appliance switches all listed functions off.Switching rest mode off▯ After the selected time elapses, the applianceswitches over to normal operation.▯ To end rest mode before expiry of the selected time,press & button.Automatic door openingThe automatic door opening function supports you inopening the door.As soon as you activate this function, automatic dooropening moves out and supports you in opening the door.9 CAUTIONRepeatedly closing the door too early will causeautomatic door opening to wear out or fail.Do not close the door as long as automatic dooropening is still moved out.If you have nevertheless closed the door, leave itclosed for 5 minutes. Automatic door opening willre-adjust itself.Open the menu item Automatic door opening ofrefrigerator compartment:1. Press à button to open the main menu.2. Press B button to move to the Basic settings menu.3. Press ™ button to open the menu.4. Press C button to move to the menu item Automaticdoor opening j.5. To change the setting, press % button.Open menu item Automatic door opening of freezercompartment:1. Press à button to open the main menu.2. Press B button to move to the Basic settings menu.3. Press ™ button.4. Press C button to move to the menu item Automaticdoor opening k.5. To change the setting, press % button.Switching on Push-to-open systemIn an installation situation without handles you can selectthe Push-to-open system. Your appliance will then open acrack if you press lightly on the door.Note: Please note that automatic door opening isdisabled if Rest mode is activated.1. Open menu item Automatic door opening of therefrigerator or the freezer compartment.2. Select menu item Push-to-open system.3. Press ™ button.4. Select menu item Opening force. Here you can selectthe level of force required to activate automatic dooropening.5. Select menu item Opening duration. Here you canselect how long the door should remain open a crackbefore it closes again automatically.Note: If the door only remains open a crack, theappliance checks once a second whether the door isstill ajar.After the selected opening duration elapses,the appliance will close the door automatically.Switching on Pull-to-open systemIn an installation situation with handles you can select thePull-to-open system. Your appliance will support you inopening the door as soon as you pull on the handle.1. Open menu item Automatic door opening of therefrigerator or the freezer compartment.2. Select menu item Pull-to-open system.3. Press ™ button.4. Select menu item Opening force. Here you can selectthe level of force required to activate automatic dooropening.Switching off automatic door opening1. Open the menu item Automatic door opening.2. Select menu item Off.3. Press ™ button.Switching Prevent condensation on oroffThis function is only available with 3-door appliances.3-door appliances are equipped with a door pillarfeaturing condensation protection.You can open the left-hand door of the refrigeratorcompartment without opening the right-hand doorbeforehand.