Gaggenau RC 462 Use & Care Manual

Also see for RC 462: Installation instruction Installation instruction Installation instructions Installation instructions Use and care guide

9Switching the Appliance OnSwitch the appliance On with the POWER Button ÿ.The appliance begins to cool. Light turns on whenthe door is open., CAUTION:Keep hands and fingers away from front and rearopenings of the refrigerator door when closing. Riskof injury to hands or fingers!Never allow children to climb on or play withthe refrigerator door.Operating Tips▯ When the appliance has been switched on, it maytake several hours until the set temperature isreached.▯ The fully automatic No Frost system ensures thatthe Freezer Compartment remains free of ice.Defrosting is not required.Setting the LanguageThe Display Languages can be changed accordingto the table in the chapter “Special Functions”,section “Setup Mode”.To change the Display Language:1. Press the SETUP Button μ.2. Press the ¾ or ¿ Selection Button, until the setlanguage is displayed.3. Press the @ or A Setting Button, until the desiredlanguage is displayed.4. Press the SETUP Button μ, in order to storethe settings.The set temperature is displayed again on theDisplay Panel.Setting the Temperature UnitThe temperature can be displayed in degreesCelsius (°C) or degrees Fahrenheit (°F).1. Press the SETUP Button μ.The first menu (Temperature Unit) is displayed.2. Press the @ or A Setting Button in orderto switch between degrees Fahrenheit (°F) anddegrees Celsius (°C).3. Press the SETUP Button μ, in order to storethe settings.The set temperature is displayed again on theDisplay Panel.Setting the temperatureRefrigerator Compartment(can be selected from +35 °F (2 °C)to +46 °F (8 °C))We recommend a setting of +37 °F (3 °C).Perishable food should not be stored above +37 °F.1. Press the ¾ Selection Button.2. Set the temperature with the @ (warmer) or A(cooler) Setting Buttons.Special FunctionsThe following Special Functions can be selectedor displayed:Setup ModeIn Setup Mode you can make your personal settings.Switching OnPress the SETUP Button μ.The first menu (temperature unit) is displayed on theDisplay Panel.