GAGGIA ANIMA 05 TROUBLESHOOTINGPag. 4/9Insert the BrewUnitInsert the BrewUnitThe indicationsThe indications BU-PBU-P changes from “N” to “Y”.changes from “N” to “Y”.Note:Note: removing the BrewUnit the indication from “Y” to “N” requiresremoving the BrewUnit the indication from “Y” to “N” requiresabout 2-3 seconds to switch.about 2-3 seconds to switch.ERROR: Check the BU presence Microswitch and the wiring (JP16).Close the Door and Dreg DrawerClose the Door and Dreg DrawerThe indicationThe indication DOORDOOR change from “N” to “Y”change from “N” to “Y”ERROR: The indication DOOR does not change; checkthe Microswitch for the door and the wiring (JP14).Note: without the Dreg Drawer correctly inserted the DOOR indica-tion cannot change!The machine passes to the Page 3The machine passes to the Page 3 (BU PAGE)(BU PAGE)PressPress Z7Z7 ““ ” to move to the next screen” to move to the next screenPage 3 (BU)Page 3 (BU)Start conditionStart conditionPress the Z1 button to move the BU to WorkPress the Z1 button to move the BU to WorkIMPORTANT NOTE: If the DREGDRAWER is not inserted or theDOOR is not closed the BU test cannot be performed. If these 2inputs are not in the right position, a warning message will beshown and the display turns to red.When the BU reaches the work position the indicationWhen the BU reaches the work position the indication WORKWORK chang-chang-es from “N” to “Y”, the number of the current is less than 200mAes from “N” to “Y”, the number of the current is less than 200mA(without BU) or 300mA (with BU).(without BU) or 300mA (with BU).ERROR:ERROR: The indicationThe indication WORKWORK doesn’t change and remain “N”,doesn’t change and remain “N”,the display backlight changes from white to red; Check the workthe display backlight changes from white to red; Check the workmicroswitch (broken?), the BU motor (blocked?) and the wiringmicroswitch (broken?), the BU motor (blocked?) and the wiring(JP16).(JP16).ERROR:ERROR: ((Without BUWithout BU) The absorbed current is more than) The absorbed current is more than200mA, the display backlight changes from white to red; check the200mA, the display backlight changes from white to red; check theBU and the motor.BU and the motor.