Gaggia Brera Operating Instructions Manual

Also see for Brera: Operating instructions Service manual Operating instructions Manual Operating instructions

• 26 •• 26 •Steady onSteady onSteady onSteady onCyclic blinkingUsing the machine for thefirst time or after a longperiod of inactivity.These simple operations will make it pos-sible to always brew excellent coffee.1 Place a large container under thedispensing spout.2 Before starting the procedure, checkthat the following icons are displayed.3 Select the pre-ground coffee functionby pressing the “ “ button one ormore times.Do not add the pre-groundcoffee to the compartment.The icon will appear on the display.4 Press the button to brew a long coffee.5 Wait until brewing is completed andempty the water tank.6 Repeat the operations from step 1 tostep 5 for 3 times; then continue withstep 7.7 Place a container under the steam wand(Pannarello, if supplied).8 Turn the selector switch clockwise to setit to the “ ” position.The following icon will be displayed.9 Dispense water until the no water sig-nal is displayed, then turn the selectorswitch counter-clockwise to set it tothe “ ” position.10 At the end, fill the water tank again.Then the products can be brewed asdescribed in the following sections.Rinse/Self-cleaning CycleThis cycle allow rinsing the coffee circuitswith fresh water.The cycle is carried out:• At machine start (with cold boiler)• After priming the water circuit (withcold boiler)• During the Stand-by preparationphase (if a coffee product has beenbrewed)• During the phase of activating thestand-by mode after pressing the“STAND-BY” button (if a coffee producthas been brewed).A small amount of water will be dis-pensed to rinse and heat all the machinecomponents; during this phase the iconsblink in sequence.Wait for the cycle to finish automatically.You can stop dispensing by press-ing either coffee button and/or the“Stand-by” button.4219-465-04381 GAG. MAN. BRERA IT-EN-DE-FR Rev.00.indd 26 14/10/2020 14:48:49