Garland GIU2.5 BI Installation And Operation Manual

Also see for GIU 2.5 BI: Service manual Instructions for use Service manual

Contents

Part # 4520895 (01/31/08)Page 16TROUBLE SHOOTINGCAUTION Do not open the cooker, dangerous electricvoltage inside.The cookers may only be opened by authorized servicepersonnel.Stop any actions if the heating area (Ceran plate) is crackedor broken, the induction cooker must be switched off anddisconnected from the electric supply. Don’t touch any partsinside the cooker.Error MessagesLED 8 LED 7 LED 6 LED 5 CODE SIGNIFICATION NOTES- - - - - No fault, normal operation- - - on 1 No spool current, Hardware overcurrent- - on - 2 High spool current, Software overcurrent- - on on 3 Temperature cooling plate- on - - 4 Temperature cooking platform *- on - on 5 Power rotary switch in line break- on on - 6 Inside temperature- on on on 7 Sensing element of cooking platform, short circuit **on on - - 12 Power reduction cooling plate temperature ***on on - on 13 Power reduction cooking platform temperature **** The induction unit can only be re-started by turning the control knob off and back on again.** The induction unit continues working but the temperature of the cooking platform is not controlled anymore*** The induction unit continues working with reduced power cycles.Trouble Shooting GuideFault Possible Cause Action to take through operator oroperating personnelNo heating indicator operation is OFF(dark)No electrical supply Check if the electrical supply (cableplugged in the wall socket), checkpreliminary fusesControl knob in OFF - position Turn control knob ONPan too small (bottom diameter lessthan 5” (127 mm )Use a suitable panPan is not placed in the center of theheating area (the cooker can’t detectthe pan)Move the pan to the center of theheating areaUnsuitable pan Choose a pan which is recommendedfor induction cooking *Cooker defective Ask your supplier for repair service,unplug the cooker from the electricalsupply