Garland Moisture+ MPOE5L Service Manual

Document #MPOELSVC0504Page 12OPERATING INSTRUCTIONS continued...Control ProgrammingRecipe Programming• NOTE: In programming product buttons (1-17),each button can have different steps called Profiles. Eachprofile can change the fan speed, cook temperature, cooktime, alarm, time mode, and moisture for a product.If more than one profile is programmed for a product,the product cannot be combined with other products.• In order to start additional cook cycles; the recipes of theproducts must be exactly the same except for cook time.1. To program recipes for the product buttons (1-17),press and hold the Program button for three, (3)seconds. When prompted, enter the code: 4-2-7-5 using buttons 1 – 0. Press the “ENTER” (lowerright blank) button.2. The display will prompt for a programmable button,1-17. Press the desired button. The LED for theselected button will light. Press “ENTER” (lowerright blank).3. The display will show the message “Profile 1” in thelower left corner and prompt for the Fan Speed onthe top line. Use the “YES” (upper right blank) and“NO” (Preheat Bread 425) buttons to toggle fanhigh and low. After selecting a fan speed, press the“ENTER” (lower right blank).4. The display will then prompt for the CookTemperature. Enter the temperature using buttons1 – 0 and press the “ENTER” (lower right blank)button.5. Next, the display will prompt for the Cook Time.Enter the cooking time using buttons 1 – 0 andpress the “ENTER” (lower right blank) button.6. Next, the display will ask for Alarm Time (to rotateitems). Enter the time using buttons 1 – 0 and press“ENTER” (lower right blank). (Enter the time atwhich the rotation needs to be done NOT howlong into the cook it needs to be done, i.e. 2:00cook time, alarm time 1:30. Alarm will sound whentimer reaches 1:30 on the display (not 0:30).)7. The display will ask for the Time Mode. Use “YES”(upper right blank) and “NO” (Preheat Bread 425)to toggle time mode between flex and straight time.Press the “ENTER” (lower right blank) button.8. The display will ask if Moisture is desired. Press the“YES” (upper right blank) and “NO” (Preheat Bread425) buttons to set moisture from NONE-LEVEL9. Press the “ENTER” (lower right blank).Moisture Level DurationNONE 0 PULSESLEVEL 1 1 PULSE EVERY 5 SECONDSLEVEL 2 1 PULSE EVERY 10 SECONDSLEVEL 3 1 PULSE EVERY 15 SECONDSLEVEL 4 1 PULSE EVERY 20 SECONDSLEVEL 5 1 PULSE EVERY 25 SECONDSLEVEL 6 1 PULSE EVERY 30 SECONDSLEVEL 7 1 PULSE EVERY 35 SECONDSLEVEL 8 1 PULSE EVERY 40 SECONDSLEVEL 9 1 PULSE EVERY 45 SECONDS