Garland XPE12 Installation, Operation And Maintenance Manual

Also see for XPE12: Service manual

Contents

Part #: GAR_IOM_ 4532522 Rev 08—6/17 51Section 3 Operation5. A save window willappears indicatingthat is saved.6. Language selection completed. System will go backto settings.TIP:Use the World icon fora Language selectionshort cutCLEAN SETTINGSThis setting will give the option to control grill temperature,clean frequency and clean time during the process ofcleaning. Computer will manage your cleaning scheduleautomachally.1. Select SETTING.2. Enter passwordand press return.3. Use down arrowto scroll to “CLEANSETTINGS”. PressSTART button.4. Select an option,numeric pad willappear, enter newsettings.• CLEAN GRILL – this option will configure the lowergrill, you can set up temperature from 150F to 450F orturn off this option by typing 32 on the numeric pad.Factory default is 3250F.• CLEAN PLATEN – this option will configure the uppergrill, you can set up temperature from 150F to 450F orturn off this option by typing 32 on the numeric pad.Factory default is 3250F.• CLEAN FREQUENCY – this option will configurethe cooking cycle you permit between clean time,computer will automatically detects when is time toclean your grill. ex: 10 CK CYC will automacatically tellyou after 10 cooking cycle that CLEANING REQUIRED.• CLEAN MIN TIME – this option will set the time ofcleaning, could be from 1 to 15 minute time.• CLEAN GRACE PERIOD – this option will set thecomputer automatically to count the cooking cycleafter clean frequency cycles completed, when cleangrace period count is completed the computer willforce the grill to CLEANING REQUIRED as only option.Clean grace period calibration is by cook cycle from 0to 1000.• CLEAN PROMPT FREQ – this option will set thecomputer to automatically detects when is time toclean. Calibration Cook Cycle from 0 to 1000• CLEAN SETPOINT TOLERANCE – this option will set thetemperature setpoint tolerance. Temperature can becalibrate from 50F to 500F• CLEAN READY ALARM – this option will set the alarmto OFF / DING / STOBE / SONG.5. A window willappears indicatingthat is saved.6. Clean settings completed. System will go back tosettings.