Garmin 190-00556-10 Owner's Manual

Also see for Quest: Features Owner's manual Declaration of conformity Owner's manual

Contents

Garmin 190-00556-10 Owner's Manual Manual pdf 13 page image

Quest Owner’s Manual 5U NIT OVERVIEW > VEHICLE INSTALLATIONRemoving the Quest and the MountTo remove the Quest from the mount, gently pull the release tab onthe top of the mount up and remove the Quest.The cradle and suction mount snap apart and back together. Toremove the mount from the cradle, turn the cradle as far as you canto the right or left. Apply pressure in that direction until the mountpops out of the ball socket.To remove the mount from the windshield, flip the lever towardyou. Pull the rubber tab on the suction cup toward you.Using the Mounting DiskUse the enclosed mounting disk as an alternative to using thesuction cup mount on your windshield. Select a suitable location onyour dashboard to place the mounting disk. Select a location wherethe unit has an unobstructed view of the sky and does not interferewith the driver’s view of the road or obstruct any controls in thevehicle.WARNING: The mounting disk affixes to your dashboard withpermanent adhesive that is extremely difficult to remove after it isinstalled.1. Clean and dry the area on your dashboard where you wantto place the mounting disk.2. Remove the backing from the permanent mountingadhesive on the bottom of the disk and place the disk on thedashboard. Press firmly for several seconds.3. Pull the lever on the suction cup up (away from the disk).Place the suction cup mount on top of the disk.4. Flip the lever down (toward the disk) to secure the suctioncup mount to the disk.