Garmin 190-00556-10 Owner's Manual

Also see for Quest: Features Owner's manual Declaration of conformity Owner's manual

Contents

Garmin 190-00556-10 Owner's Manual Manual pdf 45 page image

Quest Owner’s Manual 37C USTOMIZING YOUR QUEST> C USTOMIZING THE OVERALL SYSTEM SETUPCustomizing the Overall System SetupYou can customize various system setup features on your Quest.Press MENU two times, highlight System Setup, and press OK.GPS Mode—sets GPS to Normal, WAAS, Battery Saver (whichperiodically turns off the GPS receiver to save battery power), orGPS Off. See “Understanding GPS” beginning on page 42 formore information.Voice Guidance—determines when the Quest “speaks.”• Automatic with Chime: The unit chimes and then speaksstatus messages and guidance messages during routenavigation. For each turn on a route, the voice givesinstructions three times: after you have completed a turn, asyou are approaching the next new turn, and just before youreach the next turn.• Automatic: The unit speaks guidance messages during routenavigation, as described above. It does not give chimes.• Button Only: The unit only speaks when the Speak keyis pressed.External Power Lost—if Turn Off is set, the unit shuts downafter 30 seconds when the Quest loses external power. If Stay Onis set, the Quest runs on battery power when external power is lost.Text Language—changes all on-screen text to the selectedlanguage. Changing the text language does not affect the display ofmap data or user-entered data. Map data is always displayed in thelanguage in which it is stored in the map.Voice Language—(Quest 2 Only) changes the spoken language.Keypress Tone—turns the keypress beep On or Off.Safe Mode—turns the Safe Mode on and off. When your vehicleis moving, Safe Mode disables all Quest functions that requiresignificant operator attention and could distract the driver. Whenyou come to a complete stop, these features are automaticallyenabled. Set to Off to allow a passenger to operate the unit.To restore these settings, press the MENU key, highlight RestoreSettings, and press OK.