30 Quest Owner’s ManualU SING THE MAIN PAGES > M AP PAGEViewing the Map OrientationYou can orient the map in one of two ways. North Up shows theMap page with North always at the top, as if you were reading apaper map. Track Up allows the map to automatically rotate soyour direction of travel always appears at the top of the Map page.If you are using Track up, a white N indicator, in the top left cornerof the Map page, points to the North.Your Quest is set to show the Map page in Track Up orientationuntil you zoom out to the 200-mile zoom range or above. Tochange the map orientation settings, see page 34.North UpTrack UpData FieldsThe Map page displays data fields on the right-hand column of thepage. Information in these fields changes depending on whetheryou are navigating a route or just traveling with the Quest turnedon. Data fields also appear on the Trip Information page (page33) and the Compass page (page 21). For a complete list anddescription of data field options, see page 45.To change the data fields on the Map page:1. Open the Map page and press the MENU key.2. Highlight Edit Fields and press OK.3. Use the Rocker pad to highlight the data field you want tochange and press OK.4. Highlight the new data field type in the list and press OK.5. When you are finished changing the data fields, press Pageto exit.Data fields