Astro and DC 40 Owner’s Manual Locations1. From the main menu, selectAdvanced > Find > MarkedLocations.2. Select a marked location.3. Press MENU.4. Select Reposition Here.The position changes to yourcurrent location.Averaging Your LocationYou can average a marked locationfor more accuracy. When averaging,the Astro takes several readings at thesame location and uses the averagevalue to provide more accuracy.1. Press MARK.2. Select New > Avg to beginaveraging.3. When the Estimated Accuracy fieldreaches the level of accuracy youwant, select Save > OK.Projecting a LocationYou can create a new location byprojecting the distance and bearingfrom a marked location to a newlocation.1. From the main menu, selectAdvanced > Find > MarkedLocations.2. Select a marked location.3. Press MENU.4. Select Project Location.5. Enter the bearing and distance tothe projected location.