Garmin DriveAssist 51 Owner's Manual

2 Select the phone name connected to Smartphone Link dataand notifications.TIP: your phone may connect to hands-free calling and datausing two different names. and appear coloured next tothe phone name used for data and notifications.3 Select Smart Notifications.4 Select the check box next to each notification to show.Setting up Bluetooth features for yoursmartphone with Android™By default, all compatible Bluetooth features are enabled whenyou pair your phone. You can enable, disable, or customisecertain features.Connecting to the Smartphone Link app on yourAndroid smartphoneBefore you can connect to the Smartphone Link app, you mustpair and connect your Garmin DriveAssist device with yourphone.If you did not connect to the Smartphone Link app during thepairing process, you can connect to it for additional Bluetoothfeatures.1 From the app store on your phone, install the SmartphoneLink app.2 On your phone, open the Smartphone Link app.Disabling Bluetooth features for your smartphonewith AndroidYou can disable specific Bluetooth features and remainconnected to other features.1 Select Settings > Wireless Networks.2 Select the phone name.3 Select an option:• To disable hands-free calling, clear the Phone calls checkbox.• To disable Smartphone Link data and smart notifications,clear the Smartphone Link check box.• To disable specific app notifications, use the settings inthe Smartphone Link app.Showing or hiding notifications for your smartphone withAndroidYou can use the Smartphone Link app to select which types ofnotifications appear on your Garmin DriveAssist device.1 On your phone, open the Smartphone Link app.2 Select .3 Verify the Smart Notifications check box is selected.4 From the Notifications section, select Settings.A list of notification categories and apps appears.5 Select an option:• To enable or disable a notification, select the toggle switchnext to the category or app name.• To add an app to the list, select .Disconnecting a Bluetooth deviceYou can temporarily disconnect a Bluetooth device withoutdeleting it from the paired devices list. The Bluetooth device canconnect to your Garmin DriveAssist device automatically in thefuture.1 Select Settings > Wireless Networks.2 Select the device to disconnect.3 Clear the tick box next to the name of your paired device.Deleting a paired phoneYou can delete a paired phone to prevent it from automaticallyconnecting to your device in the future.1 Select Settings > Wireless Networks.2 Select the phone, and select Unpair device.TrafficNOTICEGarmin is not responsible for the accuracy or timeliness of thetraffic information.Your device can provide information about traffic on the roadahead or on your route. You can set your device to avoid trafficwhen calculating routes, and to find a new route to yourdestination if a large traffic delay occurs on your active route(Traffic Settings, page 22). The traffic map allows you tobrowse the map for traffic delays in your area.To provide traffic information, your device must be receivingtraffic data.• Your device receives free traffic data through theSmartphone Link app (Receiving Traffic Data UsingSmartphone Link, page 17).• All product models can receive traffic data using an over-the-air traffic receiver cable accessory (Receiving traffic datausing a traffic receiver, page 17). Go to your product pageat garmin.com to find and purchase a compatible trafficreceiver cable accessory.• Product models ending in LMT-D or LMTHD can receivetraffic data using the built-in digital traffic receiver and theincluded vehicle power cable (Receiving traffic data using atraffic receiver, page 17).Traffic data is not available in all areas. For information abouttraffic coverage areas, go to www.garmin.com/traffic.Receiving Traffic Data Using SmartphoneLinkYour device can receive free traffic data through theSmartphone Link app.1 Connect your device to Smartphone Link (Pairing with yourphone and connecting to Smartphone Link, page 14).2 On your Garmin DriveAssist device, select Settings >Traffic, and verify the Traffic tick box is selected.Receiving traffic data using a traffic receiverNOTICEHeated (metallised) windscreens could degrade theperformance of the traffic receiver.A traffic receiver receives traffic data from an over-the-airbroadcast signal, where available. An over-the-air traffic receivercable is available as an accessory for all product models. Go toyour product page at garmin.com to find and purchase acompatible traffic receiver cable accessory. Traffic data is notavailable in all areas.Connect the device to vehicle power using the traffic receivercable (Mounting and Powering the Device in Your Vehicle,page 1).NOTE: if your product model ends with LMT-D or LMTHD,you should use the power cable included with your device.The power cable has an integrated antenna for the built-indigital traffic receiver. Where available, the digital trafficreceiver receives traffic data from FM radio stations using HDRadio™ technology.When you are within a traffic coverage area, your device candisplay traffic information and help you avoid traffic delays.Traffic 17