Garmin Edge Explore 820 Owner's Manual

Also see for Edge 820: Owner's manual Owner's manual

Contents

Garmin Edge Explore 820 Owner's Manual Manual pdf 14 page image

2 Select Auto Features > Auto Lap > Auto Lap Trigger > ByPosition > Lap At.3 Select an option:• Select Lap Press Only to trigger the lap counter eachtime you select and each time you pass any of thoselocations again.• Select Start and Lap to trigger the lap counter at the GPSlocation where you select and at any location duringthe ride where you select .• Select Mark and Lap to trigger the lap counter at aspecific GPS location marked before the ride and at anylocation during the ride where you select .4 If necessary, customize the lap data fields (Customizing theData Screens, page 9).Marking Laps by DistanceYou can use the Auto Lap feature to mark the lap at a specificdistance automatically. This feature is helpful for comparing yourperformance over different parts of a ride (for example, every 10miles or 40 kilometers).1 Select > Settings > Activity Settings.2 Select Auto Features > Auto Lap > Auto Lap Trigger > ByDistance > Lap At.3 Enter a value.4 If necessary, customize the lap data fields (Customizing theData Screens, page 9).Using Auto PauseYou can use the Auto Pause®feature to pause the timerautomatically when you stop moving or when your speed dropsbelow a specified value. This feature is helpful if your rideincludes stop lights or other places where you need to slowdown or stop.NOTE: History is not recorded while the timer is stopped orpaused.1 Select > Settings > Activity Settings.2 Select Auto Features > Auto Pause.3 Select an option:• Select When Stopped to pause the timer automaticallywhen you stop moving.• Select Custom Speed to pause the timer automaticallywhen your speed drops below a specified value.4 If necessary, customize optional time data fields(Customizing the Data Screens, page 9).Using Auto SleepYou can use the Auto Sleep feature to automatically enter sleepmode after 5 minutes of inactivity. During sleep mode, thescreen is turned off and the ANT+ sensors, Bluetooth, and GPSare disconnected.1 Select > Settings > Activity Settings.2 Select Auto Features > Auto Sleep.Using Auto ScrollYou can use the Auto Scroll feature to automatically cyclethrough all of the training data screens while the timer isrunning.1 Select > Settings > Activity Settings.2 Select Auto Features > Auto Scroll.3 Select a display speed.Starting the Timer AutomaticallyThis feature automatically detects when your device hasacquired satellites and is moving. It starts the timer or remindsyou to start the timer so you can record your ride data.1 Select > Settings > Activity Settings.2 Select Timer Start Mode.3 Select an option:• Select Manual, and select to start the timer.• Select Prompted to display a visual reminder when youreach the start notice speed.• Select Auto to start the timer automatically when youreach the start notice speed.Bluetooth SettingsSelect > Settings > Bluetooth.Enable: Enables Bluetooth wireless technology.NOTE: Other Bluetooth settings appear only when Bluetoothwireless technology is enabled.Friendly Name: Allows you to enter a friendly name thatidentifies your devices with Bluetooth wireless technology.Pair Smartphone: Connects your device with a compatibleBluetooth enabled smartphone. This setting allows you to useBluetooth connected features, including LiveTrack andactivity uploads to Garmin Connect.Call and Text Alerts: Allows you to enable phone notificationsfrom your compatible smartphone.Missed Calls and Texts: Displays missed phone notificationsfrom your compatible smartphone.System SettingsSelect > Settings > System.• Display Settings (Display Settings, page 10)• Data Recording Settings (Data Recording Settings,page 10)• Unit Settings (Changing the Units of Measure, page 11)• Tone Settings (Turning the Device Tones On and Off,page 11)• Language Settings (Changing the Device Language,page 11)Changing the Satellite SettingFor increased performance in challenging environments andfaster GPS position location, you can enable GPS+GLONASS.Using the GPS+GLONASS setting reduces battery life morequickly than using only GPS.1 Select > Settings > System > GPS Mode.2 Select an option.Changing the Accent ColorYou can change the accent color on the device.1 Select > Settings > System > Color.2 Select an accent color.Display SettingsSelect > Settings > System > Display.Brightness: Sets the backlight brightness.Backlight Timeout: Sets the length of time before the backlightturns off.Color Mode: Sets the device to display day or night colors. Youcan select the Auto option to allow the device to set day ornight colors automatically based on the time of day.Screen Capture: Allows you to save the image of the devicescreen.Data Recording SettingsSelect > Settings > System > Data Recording.Recording Interval: Controls how the device records activitydata. The Smart option records key points where you changedirection, speed, or heart rate. The 1 Sec option records10 Customizing Your Device