Garmin Edge Explore 820 Owner's Manual

Also see for Edge 820: Owner's manual Owner's manual

Contents

Garmin Edge Explore 820 Owner's Manual Manual pdf 7 page image

You can swipe down from the top of the data screens to viewthe connections screen.6 If necessary, tap the screen to view the timer overlay.7 Select to stop the timer.TIP: Before you save this ride and share it on your GarminConnect account, you can change the ride type. Accurateride type data is important for creating bike friendly courses.8 Select Save Ride.9 Select .Acquiring Satellite SignalsThe device may need a clear view of the sky to acquire satellitesignals. The time and date are set automatically based on theGPS position.1 Go outdoors to an open area.The front of the device should be oriented toward the sky.2 Wait while the device locates satellites.It may take 30–60 seconds to locate satellite signals.LocationsYou can record and store locations in the device.Marking Your LocationBefore you can mark a location, you must locate satellites.If you want to remember landmarks or return to a certain spot,you can mark a location.1 Go for a ride.2 Select Where To? > > Mark Location > .Saving Locations from the Map1 Select Where To? > > Search Select Area > A MapPoint.2 Browse the map for the location.3 Select the location.Location information appears at the top of the map.4 Select the location information.5 Select > .Navigating to a Location1 Select Where To?.2 Select an option:• Select Search Tools to navigate to a point of interest, city,intersection, or known coordinates.• Select Addresses to enter a specific address.• Select Saved Locations to navigate to a saved location.• Select Recent Finds to navigate to one of the last 50locations you have found.• Select > Search Select Area to narrow your searcharea.3 Select a location.4 Select Ride.5 Follow the on-screen instructions to your destination.Navigating to Known Coordinates1 Select Where To? > Search Tools > Coordinates.2 Enter the coordinates, and select .3 Follow the on-screen instructions to your destination.Navigating Back to StartAt any point during your ride, you can return to the starting point.1 Go for a ride (Going for a Ride, page 2).2 During your ride, select anywhere on the screen to view thetimer overlay.3 Select > Where To? > Back to Start.4 Select Along Same Route or Most Direct Route.5 Select Ride.The device navigates you back to the starting point of yourride.Stopping Navigation1 Select anywhere on the screen to view the timer overlay.2 Scroll to the map.3 Select > .Projecting a LocationYou can create a new location by projecting the distance andbearing from a marked location to a new location.1 Select Where To? > Saved Locations.2 Select a location.3 Select the location information at the top of the screen.4 Select > Project Location.5 Enter the bearing and distance to the projected location.6 Select .Editing Locations1 Select Where To? > Saved Locations.2 Select a location.3 Select the information bar at the top of the screen.4 Select .5 Select an attribute.For example, select Change Elevation to enter a knownaltitude for the location.6 Enter the new information, and select .Deleting a Location1 Select Where To? > Saved Locations.2 Select a location.3 Select the location information at the top of the screen.4 Select > Delete Location > .CoursesYou can send a course from your Garmin Connect account toyour device. After it is saved to your device, you can navigateNavigation 3