190-00498-01 Rev A Garmin G1000 Pilot’s Guide for Cessna Nav III 4-19AUDIO PANEL AND CNSAUTO-TUNING THE NAV FREQUENCYNAV frequencies can be selected and loaded from the following MFD pages:• WPT – Airport Information• WPT – VOR Information• NRST – Nearest Airports• NRST – Nearest VOR• NRST – Nearest (WX, VOR) Frequencies• NRST – Nearest AirspacesThe MFD provides auto-tuning of NAV frequencies from waypoint and nearest pages. During enroutenavigation, the NAV frequency is entered automatically into the NAV standby frequency field. During approachactivation the NAV frequency is entered automatically into the NAV active frequency field.Frequencies can be automatically loaded into the NAV Frequency Boxes by highlighting the frequency andpressing the ENT Key (Figures 4-25, 4-26, and 4-27).Auto-tuning from the MFD:1) From any page that the NAV frequency can be auto-tuned, activate the cursor by pressing the FMS Knob or theappropriate softkey.2) Turn the FMS Knob to place the cursor on the desired NAV identifier.3) Press the FREQ Softkey to place the cursor on the NAV frequency (Figure 4-27).4) Press the ENT Key to load the NAV frequency into the standby field of the selected NAV radio.5) Press the Frequency Transfer Key to transfer the frequency to the NAV Active Frequency Field.Figure 4-25 NAV Frequency Auto-Tuning from the MFDTurn theFMSKnob to ScrollThrough a Listof FrequenciesPress theENTKey to Loada HighlightedFrequency intothe NAV StandbyFrequency Box
