190-00498-01 Rev. AGarmin G1000 Pilot’s Guide for Cessna Nav III7-38AUTOMATIC FLIGHT CONTROL SYSTEMAPPROACHFlying an ILS approach:1) Transition from GPS Navigation Mode to Heading Select Mode.a) Load the Runway 29R ILS approach for KFAT into the flight plan.b) Select ‘VECTORS’ for the transition.c) Use the HDG Knob to set the Selected Heading after getting vectors from ATC.d) Press the HDG Key. The autopilot turns the aircraft to the desired heading.2) Use Heading Select Mode to comply with ATC vectors as requested.3) Tune the localizer frequency.4) Press the APR Key when cleared for approach to arm Approach and Glideslope modes. ‘LOC’ and ‘GS’ appearin white as armed mode annunciations.The navigation source automatically switches to LOC. After this switch occurs, the localizer signal can becaptured and the autopilot and flight director determine when to begin the turn to intercept the final approachcourse.5) There are two options available at this point, as the autopilot flies the ILS approach:• Push the AP DISC Switch at the decisionheight and land the aircraft.• Use the GA Switch to execute a missedapproach.0033669912122115511882121122442727230303033333122 KFATClovisVORTAC( CZQ)111291075025HDG ModeGPS CourseLOC APR/GS ModeSANGO12 345GPS NAV ModeFigure 7-37 ILS Approach to KFAT
